Siemens SIMATIC RTLS PCB OEM PULSE Manuale di istruzioni per l'uso - Pagina 13
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Apparecchiature industriali Siemens SIMATIC RTLS PCB OEM PULSE. Siemens SIMATIC RTLS PCB OEM PULSE 20. Localization systems
Anche per Siemens SIMATIC RTLS PCB OEM PULSE: Manuale (11 pagine)
Stampa la pagina
Installation & Operation
3.1
Notes on installation
Note
Before you install the devices, read this section carefully to ensure trouble-free installation
and commissioning.
The devices can only be used in conjunction with the RTLS localization system.
An adhesive label with the serial number is attached to the transponder.
The transponder is installed in an enclosure so that it is no longer visible (e.g. electric
screwdriver). After installing the transponder, you need to attach the adhesive label with the
serial number to the enclosure in such a way that the serial number can be easily read from
the outside and the label cannot be wiped off.
The label is required to identify the device with the installed transponder in the
Locating Manager.
SIMATIC RTLS PCB OEM PULSE
Operating Instructions, 03/2020, C79000-G8976-C552-03
3
13