Siemens SIMATIC RTLS PCB OEM PULSE Kullanım Talimatları Kılavuzu - Sayfa 13
Endüstriyel Ekipmanlar Siemens SIMATIC RTLS PCB OEM PULSE için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SIMATIC RTLS PCB OEM PULSE 20 sayfaları. Localization systems
Ayrıca Siemens SIMATIC RTLS PCB OEM PULSE için: Manuel (11 sayfalar)
Sayfayı Yazdır
Installation & Operation
3.1
Notes on installation
Note
Before you install the devices, read this section carefully to ensure trouble-free installation
and commissioning.
The devices can only be used in conjunction with the RTLS localization system.
An adhesive label with the serial number is attached to the transponder.
The transponder is installed in an enclosure so that it is no longer visible (e.g. electric
screwdriver). After installing the transponder, you need to attach the adhesive label with the
serial number to the enclosure in such a way that the serial number can be easily read from
the outside and the label cannot be wiped off.
The label is required to identify the device with the installed transponder in the
Locating Manager.
SIMATIC RTLS PCB OEM PULSE
Operating Instructions, 03/2020, C79000-G8976-C552-03
3
13