Siemens SINUMERIK 808D Manuale di servizio - Pagina 37

Sfoglia online o scarica il pdf Manuale di servizio per Apparecchiature industriali Siemens SINUMERIK 808D. Siemens SINUMERIK 808D 48. Connecting with v60 driver
Anche per Siemens SINUMERIK 808D: Manuale di istruzioni per l'uso (34 pagine), Manuale di servizio (46 pagine), Istruzioni (2 pagine), Manuale di installazione (48 pagine)

4.2.3

Alarm 700031

Alarm description

The system detects that the magazine is neither in the spindle position nor in the original position. The tool change action

stops in this case.

PLC information

PLC address: DB1600.DBX3.7

Subroutine: DISK_MGZ_M (SBR 60)

Remedy

● Check the interface X101 on the back of the PPU for the following:

–

Whether the input state of I1.3/I1.4 is normal through the PLC status monitoring

–

Whether the connections of pins 5 and 6 are loose/broken

–

Whether pin 10 is connected to 0 V properly

● Check whether the switches for detecting the extrusion and withdrawal limits of the magazine are faulty.

Note

Press the following key on the MCP to cancel the alarm after the magazine has returned to the correct position:

4.2.4

Alarm description

The system detects that the magazine is in the spindle position and the original position at the same time. The tool change

action stops in this case.