Siemens SIWAREX R Manuale di istruzioni per l'uso - Pagina 33
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Apparecchiature industriali Siemens SIWAREX R. Siemens SIWAREX R 38. Mounting units for sb series
Anche per Siemens SIWAREX R: Manuale di istruzioni per l'uso (34 pagine)
Stampa la pagina
Revision 09/04
No. Designation
1 Adapter, left/right hand thread
2 Lock nut, 1x left hand, 1x right hand thread
3 Hexagon bolt (2x)
4 Washer (4x)
5 Joint head, 1x left hand, 1x right hand thread
6 Flange
7 Mounting screw M8 (4x)
8 Base plate
9 Top plate
Fig. 4-3 Structure of guiding
4.2
Assembly
The guidings are delivered pre-set to the optimum length. If the combination mounting
units were well aligned during mounting, the guidings can be installed immediately.
It is important that the guidings do not generate any additional transverse forces. To
largely avoid this, it is advisable not to change or set the length of the guidings. This
means the length should be set where required before the guiding is bolted. In the correct
setting, the holes in the flange (6) are in line with threaded holes in the top plate (9) and
the base plates (8). Bolting the guiding to the combination mounting unit does not
change the length. The fastening screws M8 (7) should be tightened with 23 Nm.
Document No.: A5E00353789B
Guiding for comb. mounting unit
Page 33