- ページ 33

産業機器 Siemens SIWAREX RのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SIWAREX R 38 ページ。 Mounting units for sb series
Siemens SIWAREX R にも：取扱説明書 (34 ページ)

Revision 09/04

No. Designation

1 Adapter, left/right hand thread

2 Lock nut, 1x left hand, 1x right hand thread

3 Hexagon bolt (2x)

4 Washer (4x)

5 Joint head, 1x left hand, 1x right hand thread

6 Flange

7 Mounting screw M8 (4x)

8 Base plate

9 Top plate

Fig. 4-3 Structure of guiding

4.2

Assembly

The guidings are delivered pre-set to the optimum length. If the combination mounting

units were well aligned during mounting, the guidings can be installed immediately.

It is important that the guidings do not generate any additional transverse forces. To

largely avoid this, it is advisable not to change or set the length of the guidings. This

means the length should be set where required before the guiding is bolted. In the correct

setting, the holes in the flange (6) are in line with threaded holes in the top plate (9) and

the base plates (8). Bolting the guiding to the combination mounting unit does not

change the length. The fastening screws M8 (7) should be tightened with 23 Nm.

Document No.: A5E00353789B

Guiding for comb. mounting unit

Page 33