Epson 745c - PowerLite XGA LCD Projector Manuale - Pagina 12

Stampa la pagina

Epson 745c - PowerLite XGA LCD Projector Manuale

Epson PowerLite 745c Projector

6. Select the appropriate settings for your mode:

ESSID

Password for WEB

control

Projector keyword

DHCP (Access Point

mode only)

IP address (Access

Point mode only)

Subnet mask.

(Access Point mode

only)

Gateway address

(Access Point mode

only)

7. When done making settings, highlight the

the top of the screen. Then press

button again and press

Network Screen.

Epson PowerLite 745c Projector

Ad Hoc: Enter an ESSID in the ESSID

textbox.

Access Point: Enter an ESSID, which

is the SSID name of your access point

or the name of your AirPort network.

(The name of your AirPort network

may be different from that of your

AirPort base station; select your base

station in the AirPort Admin utility and

click Configure to check the name of

your network.)

Note that the ESSID is case-sensitive.

If you want to create a password for

an internal web page, you can enter

up to 8 alphanumeric characters.

Turn this option on if you want to set

up a security keyword so that only

people in the same room as the

projector can access it. When you

connect to the projector wirelessly, it

displays a four-digit randomized

keyword on the screen that you need

to enter when prompted.

If your access point assigns IP

addresses automatically, turn this

option on. Otherwise, turn it off and

assign an IP address, subnet mask,

and gateway address manually.

Enter the IP address you want to

assign the projector. It must be

formatted like other addresses on the

network; usually the first three

sections match the access point's IP

address. The last section should be

unique.

Enter a subnet mask formatted like

other subnet masks on your network.

Enter the IP address that was assigned

to your access point or AirPort base

station when it was set up. If you don't

know the address, see "Checking the

Gateway (Access Point's) IP Address"

on page 14.

button at

. Highlight the

Enter

to return to the main EasyMP

Enter

Configuring the Network Settings for Windows

Before connecting to the projector wirelessly, make sure your

computer is configured correctly. Also, make sure that the

Internet Connection Firewall is disabled. (See your Windows

online help system for details.)

Note:

Depending on your computer's wireless network adapter card,

the dialog boxes you see may be different than those shown in

this section.

1. Access your wireless network Properties window. For

example, in Windows XP click

Network and Internet Connections

the

Network Connections

this:

2. Right-click the

select Properties. You see a screen like this:

8/04

Start > Control Panel >

. Then double-click

icon. You see a screen similar to

Right-click and select Properties

Wireless Network Connection

icon and

Click here