- ページ 12

プロジェクター Epson 745c - PowerLite XGA LCD ProjectorのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Epson 745c - PowerLite XGA LCD Projector 24 ページ。 Release of check tool for network projectors v1.00 for windows
Epson 745c - PowerLite XGA LCD Projector にも： ユーザーマニュアル (42 ページ), 操作マニュアル (36 ページ), クイック・セットアップ・マニュアル (2 ページ), 操作マニュアル (47 ページ), パーツリスト (1 ページ), 製品サポート速報 (30 ページ), クイックセットアップ (4 ページ), インストレーション・マニュアル (19 ページ), ユーザーマニュアル (1 ページ), 技術概要 (7 ページ), 製品サポート速報 (25 ページ), 製品サポート速報 (38 ページ), 製品サポート速報 (12 ページ), 製品サポート速報 (42 ページ), 製品サポート速報 (22 ページ), 製品サポート速報 (28 ページ), 製品サポート速報 (41 ページ), 製品サポート速報 (34 ページ), 製品サポート速報 (38 ページ), 製品サポート速報 (28 ページ), 製品サポート速報 (15 ページ), 製品サポート速報 (22 ページ), クイックセットアップ (2 ページ)

ページを印刷する
Epson 745c - PowerLite XGA LCD Projector マニュアル
Epson PowerLite 745c Projector
6. Select the appropriate settings for your mode:
ESSID
Password for WEB
control
Projector keyword
DHCP (Access Point
mode only)
IP address (Access
Point mode only)
Subnet mask.
(Access Point mode
only)
Gateway address
(Access Point mode
only)
7. When done making settings, highlight the
the top of the screen. Then press
button again and press
Network Screen.
12
Epson PowerLite 745c Projector
-
Ad Hoc: Enter an ESSID in the ESSID
textbox.
Access Point: Enter an ESSID, which
is the SSID name of your access point
or the name of your AirPort network.
(The name of your AirPort network
may be different from that of your
AirPort base station; select your base
station in the AirPort Admin utility and
click Configure to check the name of
your network.)
Note that the ESSID is case-sensitive.
If you want to create a password for
an internal web page, you can enter
up to 8 alphanumeric characters.
Turn this option on if you want to set
up a security keyword so that only
people in the same room as the
projector can access it. When you
connect to the projector wirelessly, it
displays a four-digit randomized
keyword on the screen that you need
to enter when prompted.
If your access point assigns IP
addresses automatically, turn this
option on. Otherwise, turn it off and
assign an IP address, subnet mask,
and gateway address manually.
Enter the IP address you want to
assign the projector. It must be
formatted like other addresses on the
network; usually the first three
sections match the access point's IP
address. The last section should be
unique.
Enter a subnet mask formatted like
other subnet masks on your network.
Enter the IP address that was assigned
to your access point or AirPort base
station when it was set up. If you don't
know the address, see "Checking the
Gateway (Access Point's) IP Address"
on page 14.
button at
OK
. Highlight the
Enter
to return to the main EasyMP
Enter
Configuring the Network Settings for Windows
Before connecting to the projector wirelessly, make sure your
computer is configured correctly. Also, make sure that the
Internet Connection Firewall is disabled. (See your Windows
online help system for details.)
Note:
Depending on your computer's wireless network adapter card,
the dialog boxes you see may be different than those shown in
this section.
1. Access your wireless network Properties window. For
example, in Windows XP click
Network and Internet Connections
the
Network Connections
this:
2. Right-click the
select Properties. You see a screen like this:
OK
8/04
Start > Control Panel >
. Then double-click
icon. You see a screen similar to
Right-click and select Properties
Wireless Network Connection
icon and
Click here