Epson 7850p - PowerLite XGA LCD Projector Manuale informativo sul prodotto - Pagina 20

Stampa la pagina

Epson 7850p - PowerLite XGA LCD Projector Manuale informativo sul prodotto

Registering Projectors in EMP Monitor

Before you can monitor a projector, you have to register it.

Follow these steps:

1. Open EMP Monitor. You see this screen:

Click here

2. Click

3. Click

detect to locate projectors currently operating

Auto

on the network. Or click

the projector's name and network address.

Note: If Auto detect fails to find the projector, your projector

may not be connected or configured correctly for the network.

Any projectors found on the network are listed:

4. Select each projector you want to add by clicking its name

and clicking

. When you're done, click

Add

. You see this screen:

Click here

and enter

Manual registration

Click here

EPSON PowerLite 7850p Projector

You see this screen listing all registered projectors:

Note: To delete a projector from the list, highlight the

projector name, and click

5. Click

. You see the status of each of your registered

projectors on the main EMP Monitor screen:

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors

using the Status, Video Source, and Error icons shown below.

This lets you see which projectors are currently being used,

from which source (or port) they are projecting an image, and

if a problem occurs.

Status icon

Video Source icon

Note: To monitor a projector when it's in standby mode (plugged

in but not projecting), you must first select

setting in the projector's Advanced1 menu. You

Standby Mode

can monitor up to 64 projectors.

For detailed status information, select the projector and click

View details

6/03

EPSON PowerLite 7850p Projector

Delete

Error icon

as the

Network ON