Epson 7850p - PowerLite XGA LCD Projector Product Information Manual - Page 20

Browse online or download pdf Product Information Manual for Projector Epson 7850p - PowerLite XGA LCD Projector. Epson 7850p - PowerLite XGA LCD Projector 25 pages. Release of check tool for network projectors v1.00 for windows
Also for Epson 7850p - PowerLite XGA LCD Projector: User Manual (42 pages), Operation Manual (36 pages), User Manual (12 pages), Replacement Parts (1 pages), Operation Manual (47 pages), Product Support Bulletin (30 pages), Installation Manual (5 pages), Quick Setup (2 pages), Brochure & Specs (2 pages), Technical Brief (7 pages), Product Support Bulletin (25 pages), Product Support Bulletin (38 pages), Product Support Bulletin (12 pages), Product Support Bulletin (42 pages), Product Support Bulletin (22 pages), Product Support Bulletin (28 pages), Product Support Bulletin (41 pages), Product Support Bulletin (34 pages), Product Support Bulletin (38 pages), Product Support Bulletin (28 pages), Product Support Bulletin (15 pages), Product Support Bulletin (22 pages)

Print Page
Epson 7850p - PowerLite XGA LCD Projector Product Information Manual
Registering Projectors in EMP Monitor
Before you can monitor a projector, you have to register it.
Follow these steps:
1. Open EMP Monitor. You see this screen:
Click here
2. Click
Register projector
3. Click
detect to locate projectors currently operating
Auto
on the network. Or click
the projector's name and network address.
Note: If Auto detect fails to find the projector, your projector
may not be connected or configured correctly for the network.
Any projectors found on the network are listed:
4. Select each projector you want to add by clicking its name
and clicking
. When you're done, click
Add
. You see this screen:
Click here
and enter
Manual registration
Click here
.
Close
EPSON PowerLite 7850p Projector
You see this screen listing all registered projectors:
Note: To delete a projector from the list, highlight the
projector name, and click
5. Click
. You see the status of each of your registered
Close
projectors on the main EMP Monitor screen:
Monitoring Your Projectors
The EMP Monitor screen lets you monitor your projectors
using the Status, Video Source, and Error icons shown below.
This lets you see which projectors are currently being used,
from which source (or port) they are projecting an image, and
if a problem occurs.
Status icon
Video Source icon
Note: To monitor a projector when it's in standby mode (plugged
in but not projecting), you must first select
setting in the projector's Advanced1 menu. You
Standby Mode
can monitor up to 64 projectors.
For detailed status information, select the projector and click
.
View details
6/03
EPSON PowerLite 7850p Projector
.
Delete
Error icon
as the
Network ON
19
-