Siemens SITRANS LVL200E Manuale di istruzioni per l'uso - Pagina 19

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Interruttore Siemens SITRANS LVL200E. Siemens SITRANS LVL200E 44. Vibrating switches
Anche per Siemens SITRANS LVL200E: Manuale di istruzioni (40 pagine), Manuale di istruzioni per l'uso (16 pagine), Manuale di istruzioni per l'uso (40 pagine)

Housing overview

MAN-100411

2. Loosen compression nut of the cable gland and remove blind

plug

3. Remove approx. 10 cm (4 in) of the cable mantle, strip approx.

1 cm (0.4 in) of insulation from the ends of the individual wires

4. Insert the cable into the sensor through the cable entry

5. Open the terminals with a screwdriver

6. Insert the wire ends into the open terminals according to the wir-

ing plan

7. Tighten the terminals with a screwdriver

8. Check the hold of the wires in the terminals by lightly pulling on

them

9. Tighten the compression nut of the cable entry gland. The seal

ring must completely encircle the cable

10. Screw the housing lid back on

The electrical connection is finished.

5.3

Wiring plan, single chamber housing

The following illustrations apply to the non-Ex as well as to the Ex-d

version.

Fig. 10: Material versions, single chamber housing

Plastic (not with Ex d)

Aluminium

Stainless steel (not with Ex d)

Stainless steel, electropolished (not with Ex d)

Filter element for pressure compensation or blind plug with version IP 66/

IP 68, 1 bar (not with Ex d)

SITRANS LVL200E - Operating Instructions