Cisco 7942G - Unified IP Phone VoIP Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Telefono IP Cisco 7942G - Unified IP Phone VoIP. Cisco 7942G - Unified IP Phone VoIP 11. Unified communications manager 9.0 (sccp and sip)
Anche per Cisco 7942G - Unified IP Phone VoIP: Manuale d'uso (23 pagine), Scheda tecnica (5 pagine), Manuale di installazione (12 pagine), Manuale d'uso (6 pagine), Manuale d'uso (4 pagine), Manuale di amministrazione (12 pagine), Manuale d'uso (13 pagine), Manuale d'uso (17 pagine), Manuale d'uso (12 pagine), Manuale d'uso (16 pagine), Manuale d'uso (6 pagine), Manuale di amministrazione (16 pagine), Risoluzione dei problemi e manutenzione (27 pagine)

Unlock configuration:

1. Press the "settings" button.

2. Use the "navigation" button and navigate down to "Unlock Config".

3. Press the "Select" button.

4. Enter password (Default factory password is "cisco").

5. Press the "Accept" button to unlock configuration.

SIP Configuration

1. Using the "navigation" button navigate up to "SIP Configuration".

2. Press the "Select" button.

3. Press the "Select" button to enter into "Line 1 Settings".

4. Enter details into:

REQUIRED FIELDS:

Name

Cisco 7942G extension number. Example: 1000.

Authentication Name

Usually the same number as "Name".

Authentication Password

The Secret of the extension as received in the e-mail associated with this extension. Example:

3dX3r5

Proxy Address

IP address of PBXware server. Example: 192.168.1.2

OPTIONAL FIELDS

Shortname

Example: John Smith, Reception, Entrance Main, Agent One etc.

Display Name

Example: John Smith, Reception, Entrance Main, Agent One etc.

Proxy Port

By default 5060

5. Press accept button and reboot Cisco 7942G.

- Conclusion: If everything is done as above described you should have successfully registered

*123

your Cisco 7942G to PBXware. Dial

to verify registration.

- For further information, please contact the manufacturer or check their web site