Cisco 8832 Manuale - Pagina 11

Sfoglia online o scarica il pdf Manuale per Telefono IP Cisco 8832. Cisco 8832 30. Masergy ip conference phone
Anche per Cisco 8832: Manuale principale della migrazione del firmware (31 pagine), Manuale d'uso (20 pagine), Manuale di avvio rapido (2 pagine), Manuale (30 pagine), Manuale di installazione (39 pagine), Manuale di avvio rapido (16 pagine), Manuale di manutenzione (9 pagine), Avvio rapido (2 pagine), Impostazioni (14 pagine), Manuale di avvio rapido (2 pagine), Manuale di riconfigurazione (2 pagine), Avvio rapido (2 pagine)

Stampa la pagina
Cisco 8832 Manuale
Your Phone
Step 2
Extend the microphone cable to the desired position.
The following figure shows installation of a wired expansion microphone.
Figure 4: Wired Expansion Microphone Installation
Related Topics
Install the Wireless Expansion Microphones
The conference phone provides the option of connecting two wireless expansion microphones.
Note
When the phone is in a call, the LED on the expansion microphone is lit green. To mute the expansion
microphone, press the Mute key. When the microphone is muted, the LED is lit red. When the battery in the
microphone is low, the battery indication LED blinks rapidly.
Before you begin
Disconnect the wired expansion microphones before you install wireless expansion microphones. You cannot
use both wired and wireless expansion microphones at the same time.
Procedure
Step 1
Position the table mount plate on the table surface location where you want to place the microphone.
Step 2
Remove the adhesive for the double-stick tape on the bottom of the table mount plate. Place the table mount
plate to adhere to the table surface.
Wired Expansion Microphone (8832
You must use either two wired microphones or two wireless microphones with the phone, but not a mixed
combination.
Install the Wireless Expansion Microphones
0nly), on page 20
Your Phone
11