Digital Loggers Ethernet Power Controller II Manuale d'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale d'uso per Controllore Digital Loggers Ethernet Power Controller II. Digital Loggers Ethernet Power Controller II 8.
Stampa la pagina
a new IP, such as 192.168.0.10, and a subnet mask of
255.255.255.0. Press the "Add" button. This new IP is added the
list. Close all windows for the configuration to take effect.
Start your Browser and type 192.168.0.100 in the URL field. The
EPC is displayed. The default user name and password are
"admin" (lower case).
%DVLF 2SHUDWLRQ
After power-up, the controller performs a sequence of self-tests to
ensure reliability. After self-test, the controller requests an IP
address if DHCP has been selected. If DHCP is not used or no
server is located, the fixed IP address on the network settings page
is selected.
The controller may then be operated via a web browser. To access
the controller, simply enter the IP address in the URL field of your
web browser. Future versions of the firmware will also support
remote operation via the serial port.
+RPH 2XWOHW &RQWURO 3DJH
To access the home page, first enter the IP address in web browser
URL field, then log in. The admin has access to all features. User
access is limited to outlets assigned by the administrator. When
configuring the power controller for the first time, use the default
"admin" username and "admin" password.
The home page contains nine links to other pages. The first five are
fixed internal links:
Ethernet Power Controller II
6
www.digital-loggers.com
Outlet Control
Clicking "Outlet Control" links to the home page used for manually
switching outlets on and off. Access to specific outlets is determined
by your login.
Setup
The setup page lets you select outlet names, program web lings,
startup delays, and the power loss recovery mode. You can also
change login credentials on this page.
RTC
The controller features an internal battery-backed up real-time clock.
Use the RTC link to view clock settings or synchronize to your local
PC time.
AutoPing
The AutoPing link lets you set parameters for automatically reboot
attached equipment. First specify an IP address to ping. Next adjust
the timing settings and use the checkboxes to link the IP to specific
circuits. For example, if a router is unreachable, you may choose to
automatically reboot both a router and a switch attached to two
different circuits.
Logout
The controller will automatically log-out when your browser session is
closed. Click this link to log-out in advance.
Help
The Help link displays the latest online manual. Since features are
subject to change without notice, this manual may not be an exact
match for your controller.
Logout
Logout ends the web session. A login is required to reconnect.
Ethernet Power Controller II
7