Ricoh SP 200 Manuale di installazione del software - Pagina 13
Sfoglia online o scarica il pdf Manuale di installazione del software per Stampante All in One Ricoh SP 200. Ricoh SP 200 21. Software installation guide
Anche per Ricoh SP 200: Manuale di installazione rapida (2 pagine), Manuale di installazione rapida (2 pagine), Manuale di installazione rapida (2 pagine)
3. Changing the IP Address Settings
Changing the IP Address Settings Using the Control Panel (SP
202SN/203SFN/204SFN/204SN only)
Configuring the Machine Settings to Obtain an IPv4 Address Automatically
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
5.
Make sure [DHCP Activated] is set to [On].
After a setting has been changed, the machine automatically reboots itself.
Configuring the Machine's IPv4 Address Manually
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
13