Ricoh SP 200 Software Installation Manual - Page 13

Browse online or download pdf Software Installation Manual for All in One Printer Ricoh SP 200. Ricoh SP 200 21 pages. Software installation guide
Also for Ricoh SP 200: Quick Installation Manual (2 pages), Quick Installation Manual (2 pages), Quick Installation Manual (2 pages)

Print Page
Ricoh SP 200 Software Installation Manual

3. Changing the IP Address Settings

Changing the IP Address Settings Using the Control Panel (SP
202SN/203SFN/204SFN/204SN only)
Configuring the Machine Settings to Obtain an IPv4 Address Automatically
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
5.
Make sure [DHCP Activated] is set to [On].
After a setting has been changed, the machine automatically reboots itself.
Configuring the Machine's IPv4 Address Manually
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK]
key.
4.
Press the [ ] or [ ] key to select [DHCP Activated], and then press the [OK] key.
13