Ricoh SP3 Bollettino tecnico - Pagina 11
Sfoglia online o scarica il pdf Bollettino tecnico per Stampante Ricoh SP3. Ricoh SP3 28.
Model:
SP3
2.3.2 HOW TO DOWNLOAD NEW SYSTEM SOFTWARE
NOTE: Before doing this, remove all printer/network cables from the SP3.
1. Check that the parallel cable is properly connected to the downloading computer.
2. Turn on the SP3, then turn on the computer.
3. Copy the new system software file to the computer's hard disk.
4. Check the location of the SCOPY program files (BAT file and EXE files) on the
computer.
5. Check the printer port to which the parallel cable is connected (LPT1).
6. After the DOS prompt appears, change to the directory that contains the SCOPY
program files,
7. On the SP3, enter the Maintenance Menu through the control panel.
Refer to the "How to enter the Maintenance Menu" section.
8. On the SP3, press the "Execute" button in the "Download new system software"
screen. The control panel displays the following message:
"Are you sure you want to Download New System Software?"
If the computer is ready to upload the software, press the "Yes" button.
9. On the computer, type the following at the DOS prompt in the directory where
SCOPY.BAT is.
SCOPY (space)File name(space)
Example:
T
echnical
c:\SCOPY\SCOPY s201r.img LPT1
B
ulletin
Date:
15-Mar-98
PAGE: 2/3
No:
7