Ricoh D3EV Manuale di servizio sul campo - Pagina 28

Sfoglia online o scarica il pdf Manuale di servizio sul campo per Accessori per stampanti Ricoh D3EV. Ricoh D3EV 38. Bypass tray

1.Replacement and Adjustment

Remove the solenoid.

Re-installation



When re-installing the solenoid, make sure that the arm of the solenoid is positioned above and in

contact with the plate of the pick-up roller shaft below.



To confirm correct installation, manually move the solenoid plunger to the left and right. When the

solenoid plunger is moved, the pick-up roller should move up and down smoothly.

Bypass Tray PCB

Remove the rear cover.

Disconnect the connectors on the board.

Remove the board.

Two rivets secure the lower edge of the board.

(Rear

Cover)