Ricoh D3EV Saha Servis Kılavuzu - Sayfa 28

Yazıcı Aksesuarları Ricoh D3EV için çevrimiçi göz atın veya pdf Saha Servis Kılavuzu indirin. Ricoh D3EV 38 sayfaları. Bypass tray

1.Replacement and Adjustment

Remove the solenoid.

Re-installation



When re-installing the solenoid, make sure that the arm of the solenoid is positioned above and in

contact with the plate of the pick-up roller shaft below.



To confirm correct installation, manually move the solenoid plunger to the left and right. When the

solenoid plunger is moved, the pick-up roller should move up and down smoothly.

Bypass Tray PCB

Remove the rear cover.

Disconnect the connectors on the board.

Remove the board.

Two rivets secure the lower edge of the board.

(Rear

Cover)