Epson EMP-7850 Manuale operativo - Pagina 38

Sfoglia online o scarica il pdf Manuale operativo per Proiettore Epson EMP-7850. Epson EMP-7850 41. Esc/vp21 command user's guide for business projectors
Anche per Epson EMP-7850: Manuale di riferimento rapido (20 pagine), Manuale d'uso (25 pagine), Manuale d'uso (25 pagine), Opuscolo e specifiche (4 pagine), Manuale d'uso (28 pagine), Manuale d'uso (28 pagine)

Setting, Monitoring and Controlling from a Computer

Using the Mail Notification Function to Report

Problems

If settings for the mail notification function have been made, notification

messages can be sent to a computer with a preset e-mail address to alert the

operator at the computer, that a problem or warning has occured with a

projector, By using this function, the operator can be notified of problems

with projectors even at locations that are removed from the projector.

TIP

Up to a maximum of three notification destinations (addresses) can be

•

recorded, and notification messages can be sent to all three destinations at

once.

If a critical problem develops with a projector which causes it to suddenly

•

stop working, it may not be possible for the projector to send a message

notifying an operator of the problem.

If "Standby Mode" in the projector's "Advanced1" menu is set to "Network

•

ON", monitoring can be carried out even when the projector is in standby

mode (when the power is off).

Before using the Mail Notification Function, check the following point.

• Network settings have been made to enable the computer and

projector to connect via Access point mode or Wired LAN

connection mode. s "Connecting in Access Point Mode or Wired

LAN Connection Mode" in the EasyMP Setup Guide

f Mail Notification Settings

Mail notification settings are made on the mail screen of the Network

Screen Access point mode advanced settings screen, or the Wired LAN

connection advanced settings screen. s "Connecting in Access Point

Mode or Wired LAN Connection Mode" in the EasyMP Setup Guide

f If a Problem Notification is Sent by Mail

If an e-mail message with "EPSON Projector" in the subject line is sent to

the

IP addressesg

that have been set as mail notification destinations, the

message is a notification message saying that there is a problem with the

projector.

The following information will be contained in the body of the message.

Line 1 : The name of the projector where the problem has occurred

Line 2 : The IP address that has been set for the projector where the

problem has occurred

Line 3 : Details of the problem

EasyMP Operation Guide