DigitaLinx DL-UHDILC Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Interruttore DigitaLinx DL-UHDILC. DigitaLinx DL-UHDILC 17.
Anche per DigitaLinx DL-UHDILC: Manuale di installazione rapida (5 pagine)

Stampa la pagina

Configuring RS232 Serial Commands

In the Power on/off pre-loading section, enter in the Baud Rate of the display device by selecting the correct

setting from the drop down menu and the click Send. The baud rate of the display device will be located in the

manufacturers owners manual of the display device.

If connection was successful, the green light next to the Send button will illuminate and pop up window will notify

you of the successful connection.

Once you have entered in the Baud Rate of the display device in the software, the DL-UHDILC

default baud rate setting will be changed to the same rate setting as well. The pop up window

will instruct you to connect the serial port again. Simply re-connect to the tool by clicking

Connect in the RS232 port configuration section.

DL-UHDILC Owners Manual