DigitaLinx DL-UHDILC Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik DigitaLinx DL-UHDILC. DigitaLinx DL-UHDILC 17 stron.
Również dla DigitaLinx DL-UHDILC: Podręcznik szybkiej instalacji (5 strony)

Configuring RS232 Serial Commands

In the Power on/off pre-loading section, enter in the Baud Rate of the display device by selecting the correct
setting from the drop down menu and the click Send. The baud rate of the display device will be located in the
manufacturers owners manual of the display device.
If connection was successful, the green light next to the Send button will illuminate and pop up window will notify
you of the successful connection.
Once you have entered in the Baud Rate of the display device in the software, the DL-UHDILC
default baud rate setting will be changed to the same rate setting as well. The pop up window
will instruct you to connect the serial port again. Simply re-connect to the tool by clicking
Connect in the RS232 port configuration section.
DL-UHDILC Owners Manual
13