Cisco WAP121 Manuale di avvio rapido - Pagina 7

Sfoglia online o scarica il pdf Manuale di avvio rapido per Punto di accesso wireless Cisco WAP121. Cisco WAP121 13. Reboot and reset to factory default settings
Anche per Cisco WAP121: Recensione (6 pagine), Scheda tecnica (7 pagine), Opuscolo e specifiche (4 pagine), Manuale di avvio rapido (13 pagine), Manuale (4 pagine), Manuale (4 pagine)

Stampa la pagina

Getting Started with the Configuration

To configure the wireless access points, follow these steps to access the

Wizard and then the web-based configuration utility from your computer.

Connect the wireless access point to the same network (IP subnet)

TEP

as your computer. The factory default IP address configuration of

the access points is DHCP. Make sure your DHCP server is running

and can be reached.

See

"Incorrect IP Address" on page 9

information, or if you do not have a DHCP server.

Locate the IP address of the wireless access point.

TEP

The wireless access points can be accessed and managed by

Cisco Small Business network tools and services including the

Cisco FindIT Network Discovery Utility that enables you to

automatically discover all supported Cisco Small Business

devices in the same local network segment as your computer.

You can get a snapshot view of each device or launch the

product configuration utility to view and configure the settings.

For more information, see www.cisco.com/go/findit.

b. The wireless access points are Bonjour-enabled and

automatically broadcast their services and listen for services

being advertised by other Bonjour-enabled devices. If you

have a Bonjour-enabled browser, such as Microsoft Internet

Explorer with a Bonjour plug-in, or the Apple Mac Safari

browser, you can find the wireless access point on your local

network without knowing its IP address.

You can download the complete Bonjour for Internet Explorer

browser from Apple's Web site by visiting

http://www.apple.com/bonjour/.

Locate the IP address assigned by your DHCP server by

accessing your router/DHCP Server; see your DHCP server

instructions for information.

Launch a web browser, such as Internet Explorer or Mozilla Firefox.

TEP

In the Address field enter the default DHCP address and press the

TEP

Enter key.

Enter the default user name of cisco and password of cisco in the

TEP

User Name and Password fields.

Click Login. The Wireless Access Point Setup Wizard appears.

TEP

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

for troubleshooting