Cisco Wap581 Manuale di avvio rapido - Pagina 5

Sfoglia online o scarica il pdf Manuale di avvio rapido per Punto di accesso wireless Cisco Wap581. Cisco Wap581 17. Reboot and reset to factory default settings
Anche per Cisco Wap581: Manuale di avvio rapido (14 pagine), Manuale (10 pagine)

Stampa la pagina
Cisco Wap581 Manuale di avvio rapido
Insecure mounting might damage the device or cause injury. Cisco is not
W
ARNING
responsible for damages incurred by insecure wall or ceiling mounting.
Determine where you want to mount the device. Verify that the surface is
S
1
TEP
smooth, flat, dry, and sturdy.
Drill two pilot holes into the surface 2.75 inches (70 mm) apart for your Cisco
S
2
TEP
WAP device.
Insert a screw into each hole, leaving a gap between the surface and the base
S
3
TEP
of the screw head.
Place the upper slots of the bracket over the screws, adjust the screws
S
4
TEP
accordingly, and slide the bracket down until the screws fit snugly into the
slots.
Using the bracket as a template, drill two more holes for the lower screws.
S
5
TEP
Insert a screw into each lower hole.
S
6
TEP
Cisco WAP125 Quick Start Guide
5