Cisco 500 Series Manuale di amministrazione - Pagina 23

Sfoglia online o scarica il pdf Manuale di amministrazione per Sistema di conferenze Cisco 500 Series. Cisco 500 Series 48. Stackable managed switches
Anche per Cisco 500 Series: Manuale di informazioni sulla sicurezza (42 pagine), Manuale (4 pagine), Quide di avvio rapido (13 pagine), Manuale di avvio rapido (21 pagine), Scheda tecnica (5 pagine), Manuale d'uso (4 pagine), Manuale d'uso (6 pagine), Manuale d'uso (46 pagine), Manuale (40 pagine), Manuale (24 pagine), Risoluzione dei problemi e manutenzione (15 pagine), Manuale di riferimento rapido (7 pagine), Manuale di avvio rapido (25 pagine)

Cisco Headset Administration

Firmware Management

Most phones and devices connected to the Unified Communications Manager support the Cisco Headset 500

Series and Cisco Headset 700 Series. Install the latest phone firmware release and device package before

connecting your headset to a phone. When the headset first connects, it downloads the required firmware and

begins the upgrade process.

For a given headset model, the following two firmware options are supported:

• Remain on current version—Choose this option if you want the headset to remain on the existing

• Latest—Choose this option to upgrade or downgrade the headset. The system installs and runs the chosen

Firmware Considerations

• Users assigned to the standard headset template will always receive the latest headset firmware and

• Settings shown in the Headset Template Configuration (both Standard and Custom) are always set to the

You can assign headset templates to user profiles in Unified Communications Manager to configure default

headset settings for your users when their Cisco IP Phone resets. Users may override their individual headset

settings from their Cisco IP Phone. Unified Communications Manager supports two types of headset templates:

Standard Default Headset Configuration Template

This is the system default template that contains the factory default settings for all headset model series. This

template contains the headset settings supported by the latest headset firmware installed on your system for

all your headset model series. You cannot edit the default settings though you can change the profile

configuration setting.

Note

The Standard Default Headset Configuration template is created only when the Cisco Headset Service is

activated in the Cisco Unified Serviceability user interface.

By default, all User Profiles are associated to the standard headset template unless the administrator associates

these user profiles to any of the custom defined headset templates. You can make copies of the standard default

headset template to create custom template with customized values of the parameters including the headset

firmware version.

firmware version (that is, the headset firmware version is not upgraded to the latest system firmware

version).

software, even if that firmware is an older release from what the headset currently has.

For example, if you choose 1-5-1-10 as the latest, that firmware will be installed on the headset regardless

of whether the headset currently has 1-5-1-9 or 1-5-1-11.

settings.

Latest firmware for all headset model series.

Cisco Headset 500 Series Administration Guide

Firmware Management