Cable Electronics CE Labs SW808HD Manuale di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per Commutatore a matrice Cable Electronics CE Labs SW808HD. Cable Electronics CE Labs SW808HD 17. High definition matrix switch

Stampa la pagina

EXIT FUNCTION DESCRIPTION

Used to exit the operating software.

OTHER USAGES

Displays the presently saved switching status as shown below:

Communication Protocol and Control Command Code

Communication Protocol:
• Baud rate 9600bps
• No, odd, or even parity
• 8-bit transmission address
• 1 bit stop address.
Refer to the "Command list.pdf" on the CD-ROM for the command
system.
This table shows the Video/Audio
Input ports corresponding to the
Output ports. When a port is closed,
ZERO will be shown in that box.
RS-232 Communication Port Connection Methods
The RS-232 port is a 9-pin female connector. The pin functions are
shown in the following table and connections in the Illustrations below:
Note: The Matrix RS-232 port is defined as DCE.
Pin
Leg
Description
number
1
N/u
Null
2
Tx
Send
3
Rx
Receive
4
N/u
Null
5
Gnd
Ground
6
N/u
Null
7
N/u
Null
8
N/u
Null
9
N/u
Null
Note: Flow control=None
Female DB9 (From PC)
Male DB9 (To Matrix)
Female DB25 (From PC)
Male DB9 (To Matrix)
Pin20 Connected to Pin6
Pins 4 5 8 Connected together
Female DB9 (From PC)
Male DB9 (To Matrix)
Pin4 Connected to Pin6
Pins 1 7 8 Connected together