Cable Electronics CE Labs SW808HD 사용 설명서 - 페이지 9
{카테고리_이름} Cable Electronics CE Labs SW808HD에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cable Electronics CE Labs SW808HD 17 페이지. High definition matrix switch
페이지 인쇄EXIT FUNCTION DESCRIPTION
Used to exit the operating software.
OTHER USAGES
Displays the presently saved switching status as shown below:
Communication Protocol and Control Command Code
Communication Protocol:
• Baud rate 9600bps
• No, odd, or even parity
• 8-bit transmission address
• 1 bit stop address.
Refer to the "Command list.pdf" on the CD-ROM for the command
system.
This table shows the Video/Audio
Input ports corresponding to the
Output ports. When a port is closed,
ZERO will be shown in that box.
RS-232 Communication Port Connection Methods
The RS-232 port is a 9-pin female connector. The pin functions are
shown in the following table and connections in the Illustrations below:
Note: The Matrix RS-232 port is defined as DCE.
Pin
Leg
Description
number
1
N/u
Null
2
Tx
Send
3
Rx
Receive
4
N/u
Null
5
Gnd
Ground
6
N/u
Null
7
N/u
Null
8
N/u
Null
9
N/u
Null
Note: Flow control=None
Female DB9 (From PC)
Male DB9 (To Matrix)
Female DB25 (From PC)
Male DB9 (To Matrix)
Pin20 Connected to Pin6
Pins 4 5 8 Connected together
Female DB9 (From PC)
Male DB9 (To Matrix)
Pin4 Connected to Pin6
Pins 1 7 8 Connected together