Cisco TelePresence IX5000 Prima impostazione - Pagina 17
Sfoglia online o scarica il pdf Prima impostazione per Sistema di conferenze Cisco TelePresence IX5000. Cisco TelePresence IX5000 40. Field-replaceable units and countryand region-specific power connectors
Anche per Cisco TelePresence IX5000: Manuale d'uso rapido (15 pagine), Manuale d'uso (26 pagine), Manuale di installazione (36 pagine), Manuale (44 pagine)
Stampa la pagina
Click the correct auxiliary display layout, then click Done.
b.
Tip
If you clicked Yes in error and your system does not have auxiliary displays, click Cancel and continue
to the next step.
If the graphic shows the correct position of the displays, click Continue. If not, click Exit Setup,
c.
power down your system, and check the cabling for your system.
Make sure that any auxiliary displays are correctly cabled as follows:
–
–
–
For more information, see the "Cable Routing Diagrams" section in the
and IX5200 Installation
OL-27038-01
If a single auxiliary display is present, connect it to the H5 port.
If two auxiliary displays are present, connect the left display to the H4 port and the right display
to the H6 port. The H5 port should remain unused.
If three auxiliary displays are present, connect the left display to the H4 port, the center display
to the H5 port, and the right display to the H6 port.
Guide.
Cisco TelePresence IX5000 and IX5200 First-Time Setup
Performing First-Time Setup
Cisco TelePresence IX5000
17