Cisco TelePresence IX5000 최초 설정 - 페이지 17

{카테고리_이름} Cisco TelePresence IX5000에 대한 최초 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence IX5000 40 페이지. Field-replaceable units and countryand region-specific power connectors
Cisco TelePresence IX5000에 대해서도 마찬가지입니다: 빠른 시작 사용 설명서 (15 페이지), 사용자 설명서 (26 페이지), 설치 매뉴얼 (36 페이지), 매뉴얼 (44 페이지)

페이지 인쇄

Click the correct auxiliary display layout, then click Done.

Tip

If you clicked Yes in error and your system does not have auxiliary displays, click Cancel and continue

to the next step.

If the graphic shows the correct position of the displays, click Continue. If not, click Exit Setup,

power down your system, and check the cabling for your system.

Make sure that any auxiliary displays are correctly cabled as follows:

–

For more information, see the "Cable Routing Diagrams" section in the

and IX5200 Installation

OL-27038-01

If a single auxiliary display is present, connect it to the H5 port.

If two auxiliary displays are present, connect the left display to the H4 port and the right display

to the H6 port. The H5 port should remain unused.

If three auxiliary displays are present, connect the left display to the H4 port, the center display

to the H5 port, and the right display to the H6 port.

Guide.

Cisco TelePresence IX5000 and IX5200 First-Time Setup

Performing First-Time Setup

Cisco TelePresence IX5000