Cisco Telepresence MX800 Manuale di installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione per Sistema di conferenze Cisco Telepresence MX800. Cisco Telepresence MX800 16. Wall-mounted mx800 single
Anche per Cisco Telepresence MX800: Manuale di avvio rapido (12 pagine), Manuale di sostituzione (46 pagine), Manuale di sostituzione (47 pagine), Manuale di installazione (30 pagine), Ricambi (24 pagine), Manuale di installazione (16 pagine), Manuale di riferimento rapido (2 pagine), Manuale (45 pagine), Manuale (45 pagine), Manuale di riferimento rapido (2 pagine), Manuale di riferimento rapido (2 pagine), Manuale introduttivo (46 pagine)

Installation guide for Cisco TelePresence MX800 Single - Wall mount

Mount wall bracket

The lower edge of the

screen image will be

at the height of these

horizontal slots.

We recommend that

the distance from

the floor to this line is

70 cm / 27.6 in.

Check that the wall bracket is level and mark the required

screw hole positions on the wall. Use at least four screws

when fastening the wall bracket. The wall bracket can be

fastened through any of the horizontal slots.

Fasten the wall bracket in a secure manner ensuring that the

wall's structure is sufficient to support the system load (screws

and mounting hardware not provided; not shown in illustration).

If you mount the system higher, note the following consequences:

- You may need to increase the distance between the video system and the

table in order for the camera to capture the closest participants.

- The camera will give an elevated view of the room. This view is not optimal

for video conferencing.

Further information:

http://www.cisco.com/go/projectworkplace

2D CAD drawings with measurements:

http://www.cisco.com/go/mx-docs

(Technical References)

Page 5