Cisco UC 520 Manuale di configurazione - Pagina 12
Sfoglia online o scarica il pdf Manuale di configurazione per Sistema di conferenze Cisco UC 520. Cisco UC 520 19. Unified communications 500 series ip pbx setup guide
Cisco Unified Communications 500 Series
A.3.
Additional Voice Configuration
To finish configuration for SIP Trunking on the UC 500 Series IP-PBX,
additional settings must be entered outside of the Telephony Setup Wizard
and SIP Trunk sections. Please complete these steps prior to configuring
the SIP Trunk.
A.3.1
Completed Telephony Setup Wizard
DNS Server and Domain Hostname
1. Navigate to Configure Routing IP Addresses
2. Select the "Device Configuration" tab
a. Domain Name: speakeasy.net
b. Enable Domain Lookup: Checked
c. Current Servers: These should have been configured during
Telephony Setup Wizard and the primary and secondary DNS
server addresses should appear here. If not, enter DNS server
IP information under New Server Enter a valid IP Address
then click "Add".
3. Click "OK" to save the settings
Page 12