Cisco UC 520 설정 매뉴얼 - 페이지 12

{카테고리_이름} Cisco UC 520에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UC 520 19 페이지. Unified communications 500 series ip pbx setup guide

Cisco UC 520 설정 매뉴얼
Cisco Unified Communications 500 Series
A.3.
Additional Voice Configuration
To finish configuration for SIP Trunking on the UC 500 Series IP-PBX,
additional settings must be entered outside of the Telephony Setup Wizard
and SIP Trunk sections. Please complete these steps prior to configuring
the SIP Trunk.
A.3.1
Completed Telephony Setup Wizard
DNS Server and Domain Hostname
1. Navigate to Configure  Routing  IP Addresses
2. Select the "Device Configuration" tab
a. Domain Name: speakeasy.net
b. Enable Domain Lookup: Checked
c. Current Servers: These should have been configured during
Telephony Setup Wizard and the primary and secondary DNS
server addresses should appear here. If not, enter DNS server
IP information under New Server  Enter a valid IP Address
then click "Add".
3. Click "OK" to save the settings
Page 12