DIGITEN WTC200 Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Termostato DIGITEN WTC200. DIGITEN WTC200 12.
Anche per DIGITEN WTC200: Manuale d'uso (8 pagine), Manuale d'uso (9 pagine)

Stampa la pagina

according to the previous setting value until 5 minutes.

Delay function

Damage can occur if the compressor restarted too soon after

shutdown. This feature forces the compressor to wait for a few

minutes before restarting.

During the waiting time, the display will flash

waiting time has elapsed, the display stop flashing and the compressor

turns on

How to set

1. Press and hold the SET button until the corresponding value flashes.

At the same time, the

button to change the number. Short press SET button to

set next valve, or long press the SET button to exit and save. use this

method to set the RUN /STOP /Delay/ HIGH /LOW value

respectively. Or after setting all the parameters, press and hold the

SET button to exit and save. When no operation time is greater

than 30 seconds in the setting state, the exit setting mode is not

saved.

NOTE, in the setting state, long press the UP or DOWN button to

continuously to change the setting value

is displayed on the LCD. Press the

, When the safe