Argo LOOP Manuale di istruzioni per l'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Ventilatore Argo LOOP. Argo LOOP 10. Desk and floor fan (air circulator)

 The most common cause of overheating is the build-up of dust in the
appliance. Remove dust deposits by unplugging the appliance and
cleaning the air outlets and grilles with the aid of a vacuum cleaner.
 Do not use abrasive detergents for cleaning this appliance. Clean
the appliance with the aid of a damp (not wet) cloth rinsed in hot
soapy water. Always remove the plug from the mains socket before
cleaning.
 Do not use the fan in dusty environments or in the presence of
flammable vapors (for example in a laboratory or in a garage)
 Use the fan in a well-ventilated area
 The fan has inside parts that generate arcs or sparks. It must not be
used in areas that could be dangerous, such as areas at risk of fire,
explosion, chemical substances or humidity-laden atmospheres
 Do not use the fan in environments with temperatures above 40 °C
 To disconnect the fan, push the switch to OFF and remove the plug
from the socket. Pull on the plug only. Avoid pulling on the cord
when disconnecting the fan.
 Do not place any objects on the cord and do not bend it.
 It is not advisable to use extension cords, as these may overheat
and cause the risk of fire. Do not use a single extension cord to
operate multiple appliances.
 Do not immerse the cord, plug or any other element of the appliance
in water or other liquids.
 Do not touch the plug with wet hands.
 Do not place the fan above or near another heat source.
 Do not connect the appliance to the mains power before it has been
properly assembled and positioned.
 Do not run the cord under carpets. Do not cover the cord with
blankets, carpets or similar materials. Place the cord far away from
busy areas or where it cannot be accidentally pulled-out.
 Do not position the fan below a socket outlet.
 Do not operate the appliance outdoors.
V 12/19
13