- ページ 3

扇風機 Argo LOOPのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Argo LOOP 10 ページ。 Desk and floor fan (air circulator)

 The most common cause of overheating is the build-up of dust in the

appliance. Remove dust deposits by unplugging the appliance and

cleaning the air outlets and grilles with the aid of a vacuum cleaner.

 Do not use abrasive detergents for cleaning this appliance. Clean

the appliance with the aid of a damp (not wet) cloth rinsed in hot

soapy water. Always remove the plug from the mains socket before

cleaning.

 Do not use the fan in dusty environments or in the presence of

flammable vapors (for example in a laboratory or in a garage)

 Use the fan in a well-ventilated area

 The fan has inside parts that generate arcs or sparks. It must not be

used in areas that could be dangerous, such as areas at risk of fire,

explosion, chemical substances or humidity-laden atmospheres

 Do not use the fan in environments with temperatures above 40 °C

 To disconnect the fan, push the switch to OFF and remove the plug

from the socket. Pull on the plug only. Avoid pulling on the cord

when disconnecting the fan.

 Do not place any objects on the cord and do not bend it.

 It is not advisable to use extension cords, as these may overheat

and cause the risk of fire. Do not use a single extension cord to

operate multiple appliances.

 Do not immerse the cord, plug or any other element of the appliance

in water or other liquids.

 Do not touch the plug with wet hands.

 Do not place the fan above or near another heat source.

 Do not connect the appliance to the mains power before it has been

properly assembled and positioned.

 Do not run the cord under carpets. Do not cover the cord with

blankets, carpets or similar materials. Place the cord far away from

busy areas or where it cannot be accidentally pulled-out.

 Do not position the fan below a socket outlet.

 Do not operate the appliance outdoors.

V 12/19