Cisco ASA 5506-X Montare il telaio

Sfoglia online o scarica il pdf Montare il telaio per Hardware di rete Cisco ASA 5506-X. Cisco ASA 5506-X 10. Threat defense reimage guide
Anche per Cisco ASA 5506-X: Manuale di avvio rapido (10 pagine), Manuale di avvio rapido (14 pagine), Manuale di configurazione facile (11 pagine), Manuale del software (37 pagine), Montare e collegare (12 pagine), Manuale di installazione (46 pagine), Manuale di installazione dell'hardware (26 pagine)

Mount the Chassis

Note

Do not remove the rubber feet included with the ASA because they are needed for proper cooling for all

mounting orientations.

•

Desktop-Mount the Chassis

You can mount the chassis on a desktop by placing it on a desk in a horizontal position. Make sure there are

no blockages or obstructions within one inch of the top of the chassis or within .5 inch of the sides and back,

so that nothing interferes with cooling. Do not remove the rubber feet included with the chassis. They are also

needed for proper cooling.

Caution

Do not stack the chassis on top of another chassis. If you stack the units, they will overheat, which causes the

units to power cycle.

Desktop-Mount the Chassis, on page 1

Wall-Mount the Chassis, on page 2

Rack-Mount the Chassis, on page 3

Install the ASA 5506H-X in a DIN Rail, on page 8

Mount the Chassis