Cisco ASA 5506W-X Montare e collegare - Pagina 6

Sfoglia online o scarica il pdf Montare e collegare per Hardware di rete Cisco ASA 5506W-X. Cisco ASA 5506W-X 12. Threat defense reimage guide
Anche per Cisco ASA 5506W-X: Manuale di avvio rapido (10 pagine), Manuale di configurazione (13 pagine), Manuale di avvio rapido (14 pagine), Manuale di configurazione facile (11 pagine), Manuale del software (37 pagine), Manuale di installazione (46 pagine), Montare il telaio (10 pagine)

Connect Cables, Turn on Power, and Verify Connectivity

Figure 5: ASA 5506H-X Installed with the DIN Rail

The chassis is now installed in the DIN rail.

What to do next

See

Connect Cables, Turn on Power, and Verify Connectivity, on page 6

Connect Cables, Turn on Power, and Verify Connectivity

After positioning or mounting the ASA, follow these steps to connect cables, turn on power, and verify

connectivity:

Step 1

Connect the network cables:

a) Management interface – Using this Management 1/1 Gigabit Ethernet port, you can connect a management computer

directly with an Ethernet cable, or you can connect the computer and the ASA to the same management network. Be

sure the PC is configured to obtain an IP address using DHCP.

Mount and Connect

to finish setting up your ASA.