Cisco ASA 5506W-X Montare il telaio - Pagina 6

Sfoglia online o scarica il pdf Montare il telaio per Hardware di rete Cisco ASA 5506W-X. Cisco ASA 5506W-X 10. Threat defense reimage guide
Anche per Cisco ASA 5506W-X: Manuale di avvio rapido (10 pagine), Manuale di configurazione (13 pagine), Manuale di avvio rapido (14 pagine), Manuale di configurazione facile (11 pagine), Manuale del software (37 pagine), Montare e collegare (12 pagine), Manuale di installazione (46 pagine)

Stampa la pagina
Cisco ASA 5506W-X Montare il telaio
Rack-Mount the Chassis
Figure 4: Install the Power Supply in the Rack Shelf
Velcro straps for power supply
1
3
Power supply stop
5
Rear sliding stop and screw (one of two screws on the
sliding stop)
a) Loosen the Velcro straps and place the power supply on the rack shelf behind the chassis.
Make sure the AC inlet cord faces the rear.
b) Align the power supply to the side and rear stops.
If the rear sliding stop is not touching the power supply, loosen the two screws, slide the stop up to touch the power
supply, and then retighten screws.
c) Re-engage the Velcro straps and tighten them to secure the power supply.
Mount the Chassis
6
Velcro straps for power supply
2
4
Power supply stop
—
Mount the Chassis