Digitimer D188 Manuale dell'operatore - Pagina 11
Sfoglia online o scarica il pdf Manuale dell'operatore per Apparecchiature di laboratorio Digitimer D188. Digitimer D188 20. Remote electrode selector
Stampa la paginaDigitimer Ltd – D188 Operator's Manual
2. Connect the 12V power supply adaptor to a powered wall socket the other end to the D188 rear
panel power input.
3. There may be a delay of up to a minute as the D188 device drivers are detected and installed by
the Windows operating system.
4. Once driver installation is complete, double click the D188App icon on the desktop to run the
control software.
5. If the software detects one or more D188's, the device ID's (serial numbers) will be shown in the
top left of each device's D188 software panel. D188's are always sorted with the lowest device
number at the top and the highest at the bottom.
6. If a D188 is not detected, the software will display "Waiting...". If this happens, check the power
supply and USB cables are connected or try a different USB port and/or wall socket.
11
Version 1.2