- ページ 11

ラボラトリー機器 Digitimer D188のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Digitimer D188 20 ページ。 Remote electrode selector

Digitimer Ltd – D188 Operator's Manual

2. Connect the 12V power supply adaptor to a powered wall socket the other end to the D188 rear

panel power input.

3. There may be a delay of up to a minute as the D188 device drivers are detected and installed by

the Windows operating system.

4. Once driver installation is complete, double click the D188App icon on the desktop to run the

control software.

5. If the software detects one or more D188's, the device ID's (serial numbers) will be shown in the

top left of each device's D188 software panel. D188's are always sorted with the lowest device

number at the top and the highest at the bottom.

6. If a D188 is not detected, the software will display "Waiting...". If this happens, check the power

supply and USB cables are connected or try a different USB port and/or wall socket.

Version 1.2