Digitone DCB Plus Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Accessori telefonici Digitone DCB Plus. Digitone DCB Plus 16. Automatically blocks and routes screened calls with caller id
Stampa la paginaprogram code listed in the manual by simply dialing that program code with the phone's keypad
to set caller lists or features. If you don't see Enter Code, then refer to page 1 above for a review of your
installation.
Testing your connection to the DCB Plus
Go offhook with the phone you are using in the TEL port. See if the DCB Plus shows the Call Progress
Timer on the lower line of the display, ex. 0:01, 0:02, etc. before attempting programming. If so, then
you should be able to see the prompt "Enter Code" when you take that phone offhook again following the
prompt "Pick Up Phone" when entering programming. If you don't see the prompt "Enter Code", then
you are using a phone not directly connected to the TEL port of the DCB Plus.
Viewing Caller Lists and Stored Number Removal
You can review what numbers are stored in each caller list by entering programming: press and hold the
Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt
for "Enter Code" displays enter:
41
to view Blocked Caller list – use arrow buttons to view up or down. To remove or unblock an
entry press and hold the Block Button for 3 seconds on the front panel. The number will then be
removed from that list.
44
to view Blocked Names list - Names can only be removed with this function in programming.
Use arrow buttons to view up or down. To remove or unblock an entry press and hold the Block
Button for 3 seconds on the front panel. The name will then be removed from that list.
51
to view Invited Caller list – use arrow buttons to view up or down. To remove a stored invited
entry press and hold the Block Button for 3 seconds on the front panel. The number will then be
removed from that list.
53
to view Invited Caller in a Blocked Area Code list – use arrow buttons to view up or down. To
remove a stored invited entry press and hold the Block Button for 3 seconds on the front panel.
The number will then be removed from that list.
61
to view VIP Caller list – use arrow buttons to view up or down. To remove a stored VIP entry
press and hold the Block Button for 3 seconds on the front panel. The number will then be removed
from that list.
Creating your own Invited Caller list
If you want to block all callers and invite only specific numbers, you can use Code 97 # * to disable
the default Global Invited List and create your own invited call list using Codes 50, 52 or 60. See
Programming Numbers - Invited, VIP and Blocked. The DCB Plus comes from the factory Inviting every
caller except No Number calls and OPX type calls which are automatically hung up on, so you just enter
those callers you want to block using either the Block button on the front panel as the calls come in or if
you already know the caller's number, you can enter it with programming.
First Ring Suppression
When a call comes in, the phone company's Caller ID information will display on all phones connected
to the telephone line but the DCB Plus will suppress the first ring to the TEL phone port to
prevent it from ringing and receiving Caller ID. If the caller is an Invited caller then the Caller ID
information will display on the next ring to the phones connected to the TEL phone port thereafter. This
stops unwanted Caller ID information from being received by the phones connected to the DCB Plus TEL
phone port. If you want to hear the first ring, enter programming: press and hold the Program Button
for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"
displays enter 71. This code will allow all rings and all Caller ID information to be received by phones
connected to the TEL phone port.
programming: when the prompt for "Enter Code" displays enter 70, display shows function.
™
– Caller ID Pass Thru Mode (Code 70)
To return to the (default) First Ring Suppression mode, enter
5