Digitone DCB Plus Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para Acessórios para telefones Digitone DCB Plus. Digitone DCB Plus 16 páginas. Automatically blocks and routes screened calls with caller id

Imprimir página

program code listed in the manual by simply dialing that program code with the phone's keypad

to set caller lists or features. If you don't see Enter Code, then refer to page 1 above for a review of your

installation.

Testing your connection to the DCB Plus

Go offhook with the phone you are using in the TEL port. See if the DCB Plus shows the Call Progress

Timer on the lower line of the display, ex. 0:01, 0:02, etc. before attempting programming. If so, then

you should be able to see the prompt "Enter Code" when you take that phone offhook again following the

prompt "Pick Up Phone" when entering programming. If you don't see the prompt "Enter Code", then

you are using a phone not directly connected to the TEL port of the DCB Plus.

Viewing Caller Lists and Stored Number Removal

You can review what numbers are stored in each caller list by entering programming: press and hold the

Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt

for "Enter Code" displays enter:

to view Blocked Caller list – use arrow buttons to view up or down. To remove or unblock an

entry press and hold the Block Button for 3 seconds on the front panel. The number will then be

removed from that list.

to view Blocked Names list - Names can only be removed with this function in programming.

Use arrow buttons to view up or down. To remove or unblock an entry press and hold the Block

Button for 3 seconds on the front panel. The name will then be removed from that list.

to view Invited Caller list – use arrow buttons to view up or down. To remove a stored invited

entry press and hold the Block Button for 3 seconds on the front panel. The number will then be

removed from that list.

to view Invited Caller in a Blocked Area Code list – use arrow buttons to view up or down. To

remove a stored invited entry press and hold the Block Button for 3 seconds on the front panel.

The number will then be removed from that list.

to view VIP Caller list – use arrow buttons to view up or down. To remove a stored VIP entry

press and hold the Block Button for 3 seconds on the front panel. The number will then be removed

from that list.

Creating your own Invited Caller list

If you want to block all callers and invite only specific numbers, you can use Code 97 # * to disable

the default Global Invited List and create your own invited call list using Codes 50, 52 or 60. See

Programming Numbers - Invited, VIP and Blocked. The DCB Plus comes from the factory Inviting every

caller except No Number calls and OPX type calls which are automatically hung up on, so you just enter

those callers you want to block using either the Block button on the front panel as the calls come in or if

you already know the caller's number, you can enter it with programming.

First Ring Suppression

When a call comes in, the phone company's Caller ID information will display on all phones connected

to the telephone line but the DCB Plus will suppress the first ring to the TEL phone port to

prevent it from ringing and receiving Caller ID. If the caller is an Invited caller then the Caller ID

information will display on the next ring to the phones connected to the TEL phone port thereafter. This

stops unwanted Caller ID information from being received by the phones connected to the DCB Plus TEL

phone port. If you want to hear the first ring, enter programming: press and hold the Program Button

for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays enter 71. This code will allow all rings and all Caller ID information to be received by phones

connected to the TEL phone port.

programming: when the prompt for "Enter Code" displays enter 70, display shows function.

™

– Caller ID Pass Thru Mode (Code 70)

To return to the (default) First Ring Suppression mode, enter