Cisco GS7000 Manuale di risoluzione dei problemi - Pagina 9

Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Hardware di rete Cisco GS7000. Cisco GS7000 12. Gainmaker node forward local injection module
Anche per Cisco GS7000: Manuale di istruzioni per l'installazione (13 pagine), Manuale di manutenzione (15 pagine), Risoluzione dei problemi (4 pagine)

Stampa la pagina
Cisco GS7000 Manuale di risoluzione dei problemi
Troubleshooting
These notes apply to the previous troubleshooting flowchart.
Note
1
2

No RF Output from Reverse Receiver

Follow this troubleshooting flowchart.
Description
Be sure all unused ports are properly terminated into 75 ohms to prevent mismatches. The
frequency response is cumulative and reflects the response of each active device in the link:
• The frequency response for the transmitter is dependent on the transmitter manufacturer's
specification.
• The frequency response of the node is ±1.0 dB from 52 MHz to 1218 MHz (for optical
receiver and amplifier combined).
It is possible that the RF amplifier is set up incorrectly. Always check to see that padding and
equalization is correct to ensure proper levels at the inputs to each gain stage. See the pad and
equalizer selection charts in
Technical Information
for correct pad and equalization.
No RF Output from Reverse Receiver
Troubleshooting
9