Cisco GS7000 Troubleshooting Manual - Page 9

Browse online or download pdf Troubleshooting Manual for Network Hardware Cisco GS7000. Cisco GS7000 12 pages. Gainmaker node forward local injection module
Also for Cisco GS7000: Installation Instructions Manual (13 pages), Maintenance Manual (15 pages), Troubleshooting (4 pages)

Print Page
Cisco GS7000 Troubleshooting Manual
Troubleshooting
These notes apply to the previous troubleshooting flowchart.
Note
1
2

No RF Output from Reverse Receiver

Follow this troubleshooting flowchart.
Description
Be sure all unused ports are properly terminated into 75 ohms to prevent mismatches. The
frequency response is cumulative and reflects the response of each active device in the link:
• The frequency response for the transmitter is dependent on the transmitter manufacturer's
specification.
• The frequency response of the node is ±1.0 dB from 52 MHz to 1218 MHz (for optical
receiver and amplifier combined).
It is possible that the RF amplifier is set up incorrectly. Always check to see that padding and
equalization is correct to ensure proper levels at the inputs to each gain stage. See the pad and
equalizer selection charts in
Technical Information
for correct pad and equalization.
No RF Output from Reverse Receiver
Troubleshooting
9