Digitroll DMS 08 LCD Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Sistemi di controllo Digitroll DMS 08 LCD. Digitroll DMS 08 LCD 16. Seeding control system

MOUNTING

MONITOR

Place the monitor on a clearly visible place in the tractor cabine and fix it with

the U-bracket and bolts, up or bottom position to avoid direct sunlight on LCD.

The display is illuminated which enables nighttime use with superb visibility

•

The monitor is connected optimally after a fuse (max. 3A) on 12 VDC,

taking care of the right polarity.

•

Connect the extension cable of modules to the monitor.

•

Speed sensors are inductive sensors, in proximity of an iron part e.g. bolt heads

give a signal. If distance between sensing bolt heads would be more than 1

meter, additional bolt signallers has to be mounted. This way, during calibration

the distance traveled in 100 bolt signals remains under 100 meters.

4-6 mm

Very important to adjust speed

sensor within the sensing distance,

Csavarfej

generally between 4-6 mm from bolt

head.

Checking operation:

•

red LED at the end of speed sensor

•

a symbol of speed sensor is blinking on monitor front

Important

of straw residues or pebbles, they may hurt the sensor.

Do not connect in line with other disturbing signal emitter

devices.

Welding works are allowed only when both power cables of

the monitor are disconnected from the tractor's electronic

system.

SPEED SENSOR FOR HECTARE COUNT

Mount speed sensor in front of a non-slipping wheel.

The best is a freewheel which sized to give at lest 1

signal in a distance traveled between 0,2 – 0,99 m.

The speed sensor gives you information about the

distance traveled.

Útjeladó

: when planning the placement of speed sensor regard the risk

MOUNTING