Digitroll DMS 08 LCD Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Sistemas de controlo Digitroll DMS 08 LCD. Digitroll DMS 08 LCD 16 páginas. Seeding control system
Imprimir páginaMOUNTING
MONITOR
Place the monitor on a clearly visible place in the tractor cabine and fix it with
the U-bracket and bolts, up or bottom position to avoid direct sunlight on LCD.
The display is illuminated which enables nighttime use with superb visibility
•
The monitor is connected optimally after a fuse (max. 3A) on 12 VDC,
taking care of the right polarity.
•
Connect the extension cable of modules to the monitor.
•
•
Speed sensors are inductive sensors, in proximity of an iron part e.g. bolt heads
give a signal. If distance between sensing bolt heads would be more than 1
meter, additional bolt signallers has to be mounted. This way, during calibration
the distance traveled in 100 bolt signals remains under 100 meters.
4-6 mm
Very important to adjust speed
sensor within the sensing distance,
Csavarfej
generally between 4-6 mm from bolt
head.
Checking operation:
•
red LED at the end of speed sensor
•
a symbol of speed sensor is blinking on monitor front
Important
of straw residues or pebbles, they may hurt the sensor.
Do not connect in line with other disturbing signal emitter
devices.
Welding works are allowed only when both power cables of
the monitor are disconnected from the tractor's electronic
system.
SPEED SENSOR FOR HECTARE COUNT
Mount speed sensor in front of a non-slipping wheel.
The best is a freewheel which sized to give at lest 1
signal in a distance traveled between 0,2 – 0,99 m.
The speed sensor gives you information about the
distance traveled.
Útjeladó
: when planning the placement of speed sensor regard the risk
MOUNTING
5