Cisco Physical Access 1125 Appliance Manuale d'uso - Pagina 20

Sfoglia online o scarica il pdf Manuale d'uso per Hardware di rete Cisco Physical Access 1125 Appliance. Cisco Physical Access 1125 Appliance 42.

Rack Mounting the Cisco PAM 1125 Appliance

This chapter provides procedures for installing rail hardware on the Cisco PAM appliance and mounting

the appliance on a two-post or four-post rack.

This chapter contains the following sections:

•

You will need to have the following items to complete the rack mounting procedure:

•

The fastener pack, within the rail installation kit, contains eight rack screws, but you must check these

Caution

to ensure that they are the appropriate size for the holes in your rack. Using the wrong size screws for

your threaded rack holes can damage the rack.

Before you begin the installation, review the warnings and cautions in this section.

Warning

APPLIANCE POWER ON/OFF: The push-button on/off power switch on the front panel of the appliance

does not turn off the AC power. To remove AC power from the appliance, you must unplug the AC

power cord from either the power supply or wall outlet.

HAZARDOUS CONDITIONS—POWER SUPPLY: Hazardous voltage, current, and energy levels are

Warning

present inside the power supply enclosure. There are no user-serviceable parts inside it; servicing

should only be done by technically qualified personnel.

HAZARDOUS CONDITIONS—DEVICES AND CABLES: Hazardous electrical conditions may be present

Warning

on power, telephone, and communication cables. Turn off the appliance and disconnect

telecommunications systems, networks, modems, and the power cord attached to the appliance

before opening it. Otherwise, personal injury or equipment damage can result.

AVOID INJURY: Lifting the appliance chassis and attaching it to the rack is a two-person job. A fully

Warning

loaded Cisco PAM appliance can exceed 13.9 kg (30.6 lbs.). If needed, use an appropriate lifting

device.

Cisco Physical Access 1125 Appliance User Guide

3-2

Installation Precautions, page 3-2

Contents of the Rail Installation Kit, page 3-3

Mid-Mounting the 1125 Appliance on a Two-Post Rack, page 3-4

Front-Mounting the 1125 Appliance on a Two-Post Rack, page 3-9

A cross (Phillips) screwdriver

Four (4) rack screws

Chapter 3

Rack Mounting the Cisco PAM 1125 Appliance

OL-20929-01