Cisco UBR7246VXR Installazione dell'hardware - Pagina 15
Sfoglia online o scarica il pdf Installazione dell'hardware per Hardware di rete Cisco UBR7246VXR. Cisco UBR7246VXR 25. Universal broadband router
Anche per Cisco UBR7246VXR: Manuale di avvio rapido (27 pagine), Manuale d'uso (7 pagine), Manuale di installazione (28 pagine)
Stampa la pagina
Figure 10
AC and DC Power Supplies
1
2
3
4
1
Cable retention clip
2
Captive installation screw
3
AC receptacle
4
Power switch
5
Handle
AC Power Supplies
Step 1
At the rear of the router, ensure that the power switch on the power supply is in the OFF (0) position.
Step 2
Slide the cable-retention clip to the left, away from the AC receptacle, and plug in the power cable.
Step 3
Secure the cable in the power supply AC receptacle by sliding the cable-retention clip to the right until it fits around
the connector. The cable-retention clip provides strain relief for the AC power cable.
Tip
For additional AC power cable strain relief, secure the cable to the power supply handle by inserting a nylon cable tie
through the hole in the handle and around the cable.
Step 4
Plug the AC power supply cable into the AC power source.
Step 5
Repeat Step 1 through Step 4 for the second power supply (if present).
Figure 11
Connecting AC-Input Power
Power
receptacle
Captive
installation
screw
AC power cable
6
5
Cable-retention clip
Power
switch
Handle
10 9
8
7
6
Captive installation screw
7
M5 grounding lugs
8
Strain relief studs
9
Power receptacle
10 Power switch
15