Cisco 7513 Series Manuale di avvio rapido - Pagina 18

Sfoglia online o scarica il pdf Manuale di avvio rapido per Server Cisco 7513 Series. Cisco 7513 Series 44. Chassis replacement
Anche per Cisco 7513 Series: Manuale di istruzioni per la sostituzione (26 pagine), Scheda tecnica (11 pagine), Manuale (30 pagine), Mantenimento (20 pagine), Manuale di istruzioni per la sostituzione (19 pagine), Manuale di istruzioni per la sostituzione (22 pagine)

Stampa la pagina
Cisco 7513 Series Manuale di avvio rapido
Connect the RSP
Connect the Console and the
Auxiliary Y-Cables
sole terminal
The console and auxiliary Y-cables allow you to
simultaneously connect the console or auxiliary
ports on two RSP2s, RSP4s, or RSP8s to a single
console terminal or external auxiliary device. These
16
are configured as system master and slave in RSP
slots 6 and 7 in the Cisco 7513.
Step 1
Connect the DB-25 female end of the
Y-cable to the console terminal device.
Step 2
Connect one DB-25 male end of the
Y-cable to an RSP or other external
auxiliary device.
Step 3
Repeat Step 2 for the other RSP or other
external device.
external
y equipment
DB-25
Console
to cons
RSPs in
DB-25
Step 1
Connect the DB-25 male end of the
Y-cable to the external auxiliary
equipment.
Step 2
Connect one DB-25 female end of the
Y-cable to auxiliary ports on an RSP in an
RSP slot.
Step 3
Repeat Step 2 for the auxiliary ports on a
second RSP in an RSP slot.
Step 4
Connect the interface processors or VIPs
to the external network. Refer to the
appropriate processor module manual,
such as the Route Switch Processor
(RSP4/4+) Installation and Configuration
Guide.
DB-25 fe
Auxiliary
to auxili
RSPs in
DB-25 fe