- ページ 18

サーバー Cisco 7513 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7513 Series 44 ページ。 Chassis replacement
Cisco 7513 Series にも：交換取扱説明書 (26 ページ), データシート (11 ページ), マニュアル (30 ページ), 維持 (20 ページ), 交換取扱説明書 (19 ページ), 交換取扱説明書 (22 ページ)

ページを印刷する

Connect the RSP

Connect the Console and the

Auxiliary Y-Cables

sole terminal

The console and auxiliary Y-cables allow you to

simultaneously connect the console or auxiliary

ports on two RSP2s, RSP4s, or RSP8s to a single

console terminal or external auxiliary device. These

are conﬁgured as system master and slave in RSP

slots 6 and 7 in the Cisco 7513.

Step 1

Connect the DB-25 female end of the

Y-cable to the console terminal device.

Step 2

Connect one DB-25 male end of the

Y-cable to an RSP or other external

auxiliary device.

Step 3

Repeat Step 2 for the other RSP or other

external device.

external

y equipment

DB-25

Console

to cons

RSPs in

DB-25

Step 1

Connect the DB-25 male end of the

Y-cable to the external auxiliary

equipment.

Step 2

Connect one DB-25 female end of the

Y-cable to auxiliary ports on an RSP in an

RSP slot.

Step 3

Repeat Step 2 for the auxiliary ports on a

second RSP in an RSP slot.

Step 4

Connect the interface processors or VIPs

to the external network. Refer to the

appropriate processor module manual,

such as the Route Switch Processor

(RSP4/4+) Installation and Conﬁguration

Guide.

DB-25 fe

Auxiliary

to auxili

RSPs in

DB-25 fe