Cisco UCS B200 M4 Nota di installazione e manutenzione - Pagina 31

Sfoglia online o scarica il pdf Nota di installazione e manutenzione per Server Cisco UCS B200 M4. Cisco UCS B200 M4 46. For e5-2600 v4 series cpus
Anche per Cisco UCS B200 M4: Nota di installazione e manutenzione (30 pagine), Manuale di aggiornamento (9 pagine), Manuale di manutenzione (24 pagine)

Servicing a Blade Server

Note

Step 3

Press the DIMM connector latches inward slightly to seat them fully.

Supported DIMMs

The DIMMs supported in this blade server are constantly being updated. A list of currently supported and

available DIMMs is in the specification sheets at:

http://www.cisco.com/en/US/products/ps10280/products_data_sheets_list.html

Do not use any memory DIMMs other than those listed in the specification sheet. Doing so may irreparably

damage the server and require an RMA and down time.

The blade server contains 24 DIMM slots—12 for each CPU. Each set of 12 DIMM slots is arranged into

four channels, where each channel has three DIMMs.

Figure 15: Memory Slots In the Blade Server

Each channel is identified by a letter—A, B, C, D for CPU1, and E, F, G, H for CPU 2. Each DIMM slot is

numbered 1, 2, or 3. Note that each DIMM slot 1 is blue, each slot 2 is black, and each slot 3 is off-white or

beige.

Be sure that the notch in the DIMM aligns with the slot. If the notch is misaligned you may damage

the DIMM, the slot, or both.

Channels A-D for CPU 1

Channels E-H for CPU 2

Cisco UCS B200 M4 Blade Server Installation and Service Note

Supported DIMMs